Night Night Bedside Crib - Instruction ManualUpdated 15 days ago

IMPORTANT: PLEASE READ THE FOLLOWING INSTRUCTIONS AND WARNINGS CAREFULLY BEFORE USE AND KEEP FOR FUTURE REFERENCE.

📘 Product Overview

This manual explains how to safely assemble and use the Baby Elegance Night Night Bedside Crib. It includes guidelines for safe usage, maintenance, and adjusting the crib height and position.

✨ Features

• Convertible side rail for bedside sleeper mode
• Secure anchor strap system
• Designed for horizontal floor use
• Includes mattress and full fabric cover

🛡️ Safety Warnings

• Do not use if the child can sit, kneel, or stand unaided
• Do not place near cords, strings, curtains or heat sources
• Do not use more than one mattress
• Only use the mattress that comes with the crib
• Always raise and secure the drop side when not connected to a bed
• Crib must not be used with adult beds less than 49cm high or more than 180cm wide
• Never use a sleep aid above the red line on the liner
• Ensure anchor straps are secured tightly around the adult bed

📦 Components Checklist

• A) Set of structure and fabric cover
• B) Support vertical
• C) Detachable lower bar
• D) Mattress

🛠️ Assembly Instructions

1. Remove mattress and place crib face down on a clean flat surface
2. Insert the four legs into the plastic supports matching the letters A-A, B-B, etc.
3. Press down until you hear the safety click
4. Insert crosspieces upward until both ends click into place
5. Turn over the crib, replace mattress, fasten Velcro straps around crosspieces

🧩 Disassembly Instructions

To disassemble the crib, follow the assembly instructions in reverse order.

📏 Adjusting the Side Rail

Lower Position

1. Open the vertical zips on both sides
2. Slide unlock buttons and lift rail upward to release
3. Insert the rail into lower anchor points until it clicks
4. Conceal excess mesh and close the horizontal zip

WARNING: Use this position only with constant adult supervision and only up to 4 months old.

Higher Position

1. Repeat unlock process from lower position
2. Insert the rail into upper anchor points until it clicks
3. Close the vertical zips to finish the process

🛏️ Fixing to Adult Bed (Bedside Sleeper Mode)

1. Ensure the height of the open crib side is level with or lower than the adult mattress
2. Pull anchor straps from under the crib, loop under the bed base, and buckle them securely
3. Tighten straps until the crib is firmly attached to the adult bed

WARNING: There must be no more than a 2cm gap between the crib and the adult bed.

🧼 Maintenance & Cleaning

• Keep metal parts dry to avoid rust
• Clean plastic parts with mild detergent and warm water
• Hand wash the cover and dry at room temperature

📞 Contact Information

Email: [email protected]
Website: www.babyelegance.com

Baby Elegance
205 Northwest Business Park
Ballycoolin, Dublin 15, Ireland