📘 Product Information

Allta Swing by Baby Elegance provides a gentle and soothing natural rocking motion to calm your little one.

Designed with your baby's comfort and safety in mind, this swing boasts plush, thickly padded cushions and a 5-point safety buckle harness system. Its ergonomic and modern design is not only functional but also stylish, and it is lightweight and easy to assemble.


1. Suitable for use from birth to 9kg.
2. Has assembled dimensions of 65L x 65W x 72H cm and folded dimensions of 65L x 16.5W x 63.5H cm.
3. Boasts an innovative ergonomic lightweight design.
4. Easy one-step assembly process.
5. Comes with white colour USB-DC Cable, 1.5M*¢2.5.
6. The package DOES NOT include a power AC adaptor.

7. Can be powered by 4 x AAA alkaline batteries (Attention: 4 x AAA batteries are NOT INCLUDED in the package).

The swing must be supplied via a suitable transformer for toys.

Specifications :
INPUT:100-240V ~ 50/60Hz. 0.2A MAX
OUTPUT:5.0V 1.0A. 5.0W

⚠️ Safety Information

WARNING

1. Never leave the child unattended.
2. Do not use this product once your child can sit up unaided or weighs more than 9 kg.
3. Never use this product on an elevated surface (e.g. a table).
4. Always use the restraint system.
5. To avoid injury ensure that children are kept away when unfolding and folding this product.
6. Do not let children play with this product.
7. Do not move or lift this product with the baby inside it.
8. When the product is connected to a music player, ensure that the volume of the music player is set to a low value.
9. Never let the child sleep in this product. This product does not replace a cot or a crib. Should the child fall asleep, then it should be placed in a suitable cot or crib.
10. Do not use the product if any components are broken or missing.
11. Do not use accessories or replacement parts other than those approved by the manufacturer. If any questions please contact Baby Elegance, our contact information is on last page of this instruction manual.
12. We advise an adult to do weekly safety check and keep good maintenance of the product, ensure all locking mechanisms are correctly engaged and correctly adjusted before using. Please always keep the product clean.
13. To avoid the risk of suocation, keep all plastic bags and packaging out of reach of babies and young children!
14. Keep the USB cable and any adaptor and batteries out of reach of babies and young children ! Keep USB cable and adaptor and batteries away from fire ! Be careful with water ! Avoid exposure to the sun! Do not place in humid environment! Do not use sharp tools to cut!
15. The product can be assembled only by adult.
16. Never use this product on a soft surface (e.g. bed, sofa, cushion) because the product may collapse and suffocate the child.
17. Use the product on a flat and stable surface.
18. Do not adjust or modify the product when the child is inside.
19. Do not let other children kick, push, adjust the product whilst a baby is inside.
20. Do not use the product near stairs.
21. To prevent the risk of tipping, the product should never be carried by one or two persons whilst a child is inside.
22. Use the product away from fire, heat sources, moisture and liquids.
23. We suggest you against a second-hand product because you never know its history. You are responsible for your child safety.
24. We suggest DO NOT use this product longer than 2 years, the quality of materials may change with aging.
25. If any questions, please ensure you have following information at hand when you contact us:
-serial number of our product
-age and weight of your child
-proof of purchase of our product
26. For environment reasons, when you have stopped using this product, we ask that you dispose of the product in the proper waste facilities in accordance with local legislation. Please remove any batteries safely according to your local legislation requirements.

Please store away from children.
Please store the product in clean, dry and safe place.

📦 Components

PLEASE CHECK THAT YOU HAVE ALL THE COMPONENTS LISTED BELOW, AND ALL PARTS ARE IN GOOD CONDITION BEFORE STARTING ASSEMBLY

1. Head pad x 1
2. Main soft cover x 1 + metal tube frame underneath once assembled =Main seat
3. 5-point buckle harness system x 1 set (2 x shoulder straps and 2 x waist straps are adjustable in length)
4. Shoulder pad x 2
5. Main Frame base x 1
6. White color USB-DC cable x 1

🛠️ Assembly

Battery assembly

ATTENTION:

1. The battery compartment is fixed by a screw, screw size: M3.0 X 12 MM (head 5.1 mm)
2. Recommended tool of screwdriver 4*13 cm
3. Battery: 4 x 1,5V = 6V (4 x AAA alkaline dry batteries)

WARNING:

1. Non-rechargeable batteries are not to be recharged.
2. Different types of batteries or new and used batteries are not to be mixed.
3. Batteries are to be inserted with the correct polarity.
4. Exhausted batteries are to be removed from the infant swing.

Battery assembly and disassembly:

1) Find the correct location of battery compartment.
2) Use recommended correct screw driver to open the battery cover.
3) Load 4 x AAA correct alkaline dry batteries in the correct polarity.
4) Fasten the battery cover with the original correct size screw.

When need to remove the exhausted batteries, use the same recommended screw driver to open the cover and take out the 4 batteries and fasten the cover with the original correct size screw.

Keep the removed 4 x batteries out of reach of children and store them safely according to your local legislation requirements.


Assembly Steps

Step 1: Insert the lower metal tube into the upper metal tube (do the same for both the left and right sides). Make sure the locking pin on each lower tube fully pops out through the hole in the upper tube.

Step 2: Put the metal tube frame into the backside of the main soft cover fully, and 100% fasten the two pairs of buttons of the main soft cover.

Step 3: Turn back the Main seat to front side and insert it into the Main frame base.

Keep the upper Main seat D hole and lower Main frame base D iron shaft in the same direction.

Insert the Upper Main seat into lower Main frame base, then rotate the Upper Main seat left and right slightly, next press down the Upper Main seat after alignment.

The product is 100% assembled. Use the front view as a reference.

🧸 Use

Prepare to use the Product

Step 4: Press the central button of the buckle to unfasten the 5-point safety buckle harness system

Step 5: Place your baby into the product. Fully fasten and close the 5-point buckle harness system (both left and right sides must be secured in the same way). Adjust the two shoulder straps and two waist straps to fit your baby’s body securely and comfortably.

Use of Product

The product is suitable for new born baby age reference is up to 6 months, maximum weight of 9 kg.

WARNING:

1. Never leave the child unattended.
2. Do not use this product once your child can sit up unaided or weighs more than 9 kg.
3. Never use this product on an elevated surface (e.g. a table).
4. Always use the restraint system.

🧼 Cleaning

Cleaning and maintenance

1. Small stains on the covering should be cleaned with a wet cloth and a mild detergent.
2. Covering can be removed and handwashed at temperature up to 30°C and with a mild laundry detergent.
3. Do not use bleach or other strong cleaning agents.
4. Do not machine wash and tumble dry.
5. Wet covering should be laid out and left to dry fully.
6. Frame and plastic elements should be cleaned with a wet cloth and a mild detergent. Before each use, frame and plastic elements should be wiped dry.
7. Store the product in a dry place and keep it away from high temperatures and moisture.

🧩 Disassembly

If you need to disassemble the product, please follow the following step and store the product in clean, dry and safe place.

1. Push the sheet metal in and lift the seat up.

2. Store the product and its USB cable away from children.

IMPORTANT: Please remove the batteries from the compartment before storing away the product for a prolonged period of time or before supplying the product via its USB cable.

📞 Contact Information

Company Address:

Unit 205, Northwest Business Park,
Ballycoolin, Dublin, D15 F512,
Ireland

Tel: + 353 1 8203333
www.babyelegance.com

London office address:

International House,
142 Cromwell Road,
London, SW7 4EF,
United Kingdom

@babyeleganceire

If you have any questions or need support, feel free to reach out to us at:

[email protected]

S.F. Manufacturing Ltd. T/A Baby Elegance
S.F. Manufacturing (UK) Limited

This product is manufactured in China
Made in China